检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:余洁 王宇航[1,2] 刘界鹏 周保旭[1,2] YU Jie;WANG Yuhang;LIU Jiepeng;ZHOU Baoxu(School of Civil Engineering,Chongqing University,Chongqing 400045,China;Key Laboratory of New Technology for Construction of Cities in Mountain Area(Chongqing University),Ministry of Education,Chongqing 400045,China)
机构地区:[1]重庆大学土木工程学院,重庆400045 [2]重庆大学山地城镇建设与新技术教育部重点实验室,重庆400045
出 处:《建筑结构学报》2019年第S01期316-324,共9页Journal of Building Structures
基 金:中央高校基本业务费专项(2018CDYJSY0055);国家重点研发计划(2016YFC0701201);国家自然科学基金项目(51778085);重庆市技术创新与应用示范(社会民生类重点研发)项目(cstc2018jscx-mszdX0099).
摘 要:为量化连续组合梁负弯矩区由于混凝土板开裂而逐渐退出工作导致梁截面的抗弯刚度下降,对4根装配整体式预应力钢-混凝土组合梁、2根装配整体式钢-混凝土组合梁以及2根现浇预应力钢-混凝土组合梁进行静载试验,将试验得到的刚度值与折减刚度法以及采用美国《钢筋混凝土房屋建筑规范》中相关规定计算的刚度进行对比,结果表明:对于装配整体式预应力钢-混凝土组合梁以及现浇预应力钢-混凝土组合梁,由于预应力的存在提高了试件的开裂荷载,减小了混凝土在正常使用荷载作用下的开裂程度,从而导致开裂对其刚度的影响并不明显,采用仅考虑界面滑移的未开裂折减刚度计算值与试验值吻合较好;对于装配整体式钢-混凝土组合梁,美国《钢筋混凝土房屋建筑规范》中的相关规定考虑混凝土受拉刚化效应以及界面滑移效应的刚度计算值与试验结果吻合较好。In order to quantify the decrease of bending stiffness of the beam section in the negative bending moment region of continuous composite beams when the concrete deck cracks and gradually quiting its work,static load tests were carried out on four assembled monolithic steel-prestressed concrete composite beams, two assembled monolithic steel-concrete composite beams and two steel-cast-in-place prestressed concrete composite beams. The test results of stiffness were compared with calculated value of reduced rigidity method and ‘Building code requirements for reinforced concrete and commentary’. Comparing the calculated values for assembled monolithic steel-prestressed concrete composite beam and steel-cast-in-place-prestressed concrete composite beam, it can be found that the cracking degree of concrete under normal service load is reduced and the influence of cracking on its stiffness is not obvious due to the existence of the prestressed improve the cracking load of specimens. The calculated value of reduced stiffness only considering interface slippage effect before crack agrees well with the test results. For assembled monolithic steel-concrete composite beams, the calculated values of the stiffness taking into account tensile stiffness effect and slippage effect of concrete in ‘Building code requirements for reinforced concrete and commentary’ are in good agreement with the test results.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.63