检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:林少彬[1] 廖岩[1] 张淼[1] 丁昌明[1] 罗添[1] 张明[1] 丁亮[1]
机构地区:[1]中国疾病预防控制中心环境与健康相关产品安全所,北京100021
出 处:《中国卫生工程学》2007年第3期138-140,共3页Chinese Journal of Public Health Engineering
基 金:卫生部卫生标准基金资助项目
摘 要:目的 建立输配水材料中双酚A的测定方法,并测定饮水输配水材料中双酚A含量.方法 用液相色谱-串联质谱(LC/MS/MS)的方法,选择最佳的仪器条件,对30种输配水材料进行测定.结果 双酚A在0~100 ng/ml浓度范围内呈良好的线性关系(r=0.999 4),检出限为5μg/kg,回收率在90%~99%之间,RSD在1.8%~5.0%之间.在检测的30个样品中,检出含有双酚A的样品有9个,检出率为30%;离子交换树脂双酚A含量高达1.82 mg/kg.结论 本实验所建立的方法快速、灵敏(检出限达5μg/kg),选择性好,结果准确可靠.Objective To develop methods for the determination of bisphenol A in drinking water system components.Methods 30 samples were quantitatively analyzed by liquid chromatography-tandem mass spectrometry(LC/MS/MS).Results The linear range of Bisphenol A was 0-100 ng/ml and the correlation coefficient was 0.999 4,the detection limit was 5 μg/kg,the recovery rate was 90%-99%,and relative standard deviation was 1.8%-5.0%.Bisphenol A was detected in nine out of thirty samples,the detection rate was 30% and the maximum value was 1.82 mg/kg.Conclusion The method is rapid,sensitive and accurate.
分 类 号:R115[医药卫生—公共卫生与预防医学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229