碱激发碳酸盐矿灌浆材料的制备与模拟灌浆试验  

Study on the Manufacture and Simulated Grouting Test of Alkali-activated-carbonatite Grouting Material

作　　者：殷素红[1] 王元光[2] 文梓芸[1] 余其俊[1] 

机构地区：[1]华南理工大学材料科学与工程学院 [2]广东省建筑科学研究院,广东广州510500

出　　处：《材料科学与工程学报》2007年第4期506-510,共5页Journal of Materials Science and Engineering

基　　金：国家自然科学基金青年基金资助项目(50409011);广东省自然科学基金博士启动资助项目(05300222);武汉理工大学硅酸盐材料工程教育部重点实验室开放基金资助项目(SYSJJ2005-05)

摘　　要：碱激发碳酸盐矿灌浆材料是一种新型无机灌浆材料。本文从硅酸钠溶液的改性、碳酸盐矿的粉磨和浆液的制备等三方面详细分析说明了其制备过程,并通过实验室模拟灌浆试验研究了灌浆效果、可灌性影响因素和适宜的灌浆工艺参数。研究结果表明,碱激发碳酸盐矿灌浆材料可以采用浆液制备与灌浆施工结合于一体的连续化灌浆工艺,进行单液灌浆;配方为碳酸盐矿粉:硅酸钠溶液:水=1.0∶0.6∶0.1的灌浆材料可灌性好,灌注的砂柱体抗压强度和抗渗性能良好。Alkali-activated-carbonatite grouting material(AACGM) is a new type of inorganic grouting material.In this paper the manufacturing process of AACGM is introduced from the aspects of the modification of sodium silicate solution,grinding of carbonatite and slurry preparation.Simulated grouting tests were carried out in laboratory to investigate the grouting effect of AACGM,the factors influencing its grouting ability and appropriate technological parameters for its grouting.The results show that when AACGM is used the single-liquid grouting process can be adopted in which slurry preparation and grouting is simultaneously and continuously conducted,and the sand cylinders grouted with AACGM with carbonatite powder∶sodium silicate solution∶water ratio being 1.0∶0.6∶0.1 by mass have favorable compressive strength and impermeability.

关 键 词：碱激发材料 碳酸盐矿 灌浆材料 浆液制备 模拟灌浆 

分 类 号：TU47[建筑科学—结构工程] TU52[建筑科学—土工工程]