金属铍中杂质元素的ICP-AES分析方法研究  

Study on Analysis Method of Impurities in Beryllium by ICP-AES

作　　者：刘勇[1] 王怀胜[1] 沈岚[1] 飞跃 

机构地区：[1]中国工程物理研究院,四川绵阳621900

出　　处：《原子能科学技术》2003年第z1期173-175,180,共4页Atomic Energy Science and Technology

摘　　要：研究用HCl溶解金属铍,在HNO_3介质中用磷酸二丁酯(DBPA)-苯萃取,将铍与待测杂质元素分离。用LCP-AES法测定Co、Mn、Mg、Cr、Si、Cu、Al、Ni8种杂质元素的含量。取样量为40mg时,上述杂质元素的测定范围在5.0×10^(-4)％～0.1％之间,方法回收率为95％～104％,相对标准偏差优于10％(n=6)。The method for determination of impurities Co,Mn,Mg,Cr,Si,Cu, Al and Ni in Be by ICP-AES is studied. The Be sample is dissolved by HCl,and is extracted by DBPA-benzoyl from HNO3 medium. The determined range of impurity elements is from 5. 0×10-4% to 0. 1%. The recovery is from 95% to 104% and the relative standard deviation is less than 10%(n = 6).

关 键 词：金属铍 杂质元素 萃取 ICP-AES 

分 类 号：O657.31[理学—分析化学]