金属垫片密封泄漏模型试验研究  

Experimental Research on Leakage Model of Metallic Gasket Seals

作　　者：冯秀[1] 顾伯勤[2] 

机构地区：[1]南京化工职业技术学院机械技术系,江苏南京210048 [2]南京工业大学机械与动力工程学院,江苏南京210009

出　　处：《润滑与密封》2008年第9期48-50,共3页Lubrication Engineering

基　　金：江苏省"六大人才高峰"资助项目(07-D-027);南京市科技发展计划项目(200603009)

摘　　要：建立了气体通过金属垫片的泄漏模型。对常温下金属平垫片密封性能进行了试验研究,研究了压紧应力、介质压力和表面形貌对密封性能的影响。试验表明,泄漏率随分形维数、压紧应力和尺度系数的变化规律与理论模型的描述基本一致,泄漏率的理论计算值与试验结果吻合较好,表明建立的金属垫片泄漏模型是合理的。建立的泄漏率计算公式将泄漏率、压紧应力、介质压力和密封表面分形参数联系在一起,因而使以最大允许泄漏率为准则的金属垫片密封连接设计以及紧密性评价成为可能。Leakage model for gas passing through metallic gasket was established.The experimental investigation on the sealing performance of metallic gaskets was carried out,and the effect of the compressive stress,the medium pressure,and the surface topography on the sealing performance was researched.The results show that the relationship among the leakage rate,the fractal dimension,the compressive stress and the scale coefficient obtained by experiment,is approximately the same as that by the sealing model of meta...

关 键 词：金属垫片 密封 泄漏模型 分形 

分 类 号：TH136[机械工程—机械制造及自动化]