检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:龙广成[1] 谢友均[1] 余志武[1] 刘运华[2]
机构地区:[1]中南大学土木建筑学院,长沙410075 [2]郴州市建设工程质量安全监督管理站,郴州423000
出 处:《工业建筑》2008年第z1期854-857,共4页Industrial Construction
摘 要:为了对结构自密实混凝土的抗压强度进行准确检测与评定,结合实际工程实践,采用无损检测方法和破损方法,试验研究C40和C30两种强度等级自密实混凝土的构件和同条件试件抗压强度之间的对应关系。结果表明:采用现行的回弹法对结构自密实混凝土抗压强度进行评定时,所得到的测区自密实混凝土的回弹法抗压强度换算值偏低。可通过采取修正处理的方式,按现行的《回弹法检测混凝土抗压强度技术规程》对结构自密实混凝土的抗压强度进行检测与评定。The nondestructive method and destructive method were used to test the compressive strength of self-compacting concretes(SCC) with 30MPa and 40MPa compressive strength in actual structure and cubic sample by experiments in job site and laboratory,aimed at developing an inspecting and appraising method of compressive strength for SCC in actual structure.Results indicated that the conversion value of compressive strength of SCC in actual structure obtained by existed rebound method is lower compared with the corresponding experimental value.The compressive strength of SCC in actual structure can be inspected and appraised according to existed Technical Guideline of Compressive Strength Inspection of Concrete by Rebound Method by modifying treatment.
分 类 号:TU528[建筑科学—建筑技术科学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.187