检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李斐[1] 姜东升[2] 唐晓军[2] 王超[2] 杜涛[2] 张申金[2] 杨建坤[1]
机构地区:[1]国防科学技术大学理学院,长沙410073 [2]固体激光技术国家重点实验室,北京100015
出 处:《红外与激光工程》2007年第z1期314-317,共4页Infrared and Laser Engineering
摘 要:基于二极管泵浦的固体热容激光器,采用有限元软件ANSYS模拟了泵浦光高斯分布条件下,圆片状Nd:GGG晶体内部的温度分布,计算并分析了热致折射率梯度和端面形变带来的光学畸变对热容激光器输出激光波前的影响。利用干涉法对介质的光学畸变进行了测量,提取出畸变的轮廓图,计算出等效热焦距,与模拟结果基本相符。结果表明:泵浦光与激光介质形状的不匹配将会使激光介质产生光学畸变,光学畸变的形状与泵浦光的形状密切相关。The temperature distribution in laser medium of LD pumped heat-capacity laser is simulated with the pump Gaussian distributed on the end surface of the medium by using ANSYS.The optical distortions which resulted from thermal refractive index gradient and the deformation of the end plane are calculated.The total distortion is measured by interference-method and its skeleton map is achieved.The result shows that distortions are caused by the inconsistent shapes of the pump and the laser medium,and their shapes rely on the pump shape.
关 键 词:光学畸变 不均匀泵浦 热容激光器 温度分布 Nd:CJGG
分 类 号:TN248.1[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.19.255.50