连铸坯热送热装工艺在济钢中板厂的实施  

Practice of Continuous Casting Billet Hot Charging Process at The Medium Plate Plant of Jigang

作　　者：杨公本[1] 牛玮[1] 隈勇[1] 陈守乾[1] 

机构地区：[1]济南钢铁集团总公司,山东济南250101

出　　处：《山东冶金》2002年第3期11-12,共2页Shandong Metallurgy

摘　　要：针对优质煤气资源不足的现状 ,济钢中板厂实施连铸坯热送热装工艺。通过改造上料辊道 ,加强外部协调 ,使待煤气停产时间减少了 110 h,吨板燃耗降低了 1.5 1m3/h,提高了中板产量。Aiming at the actuality of inadequate resources of good quality gases, the hot charging process of continuous casting billets is put into practice at the Medium Plate Plant of Jigang. Through reforming the charging roller and strengthening the exterior coordination, the delay time of waiting gas is decreased by 110h, the fuel consumption per ton of plate is decreased by 1.51 m 3/t , and the production of plate is increased.

关 键 词：连铸坯 热送热装 燃耗 上料辊道 

分 类 号：TG307[金属学及工艺—金属压力加工]