活性染料湿摩擦牢度提升剂的工艺研究与应用  

Study on Application of Modified Polyacrylate Wet Rubbing Fastness Improver Emulsion

作　　者：王婷[1] 权衡[1] 

机构地区：[1]武汉科技学院,湖北武汉430073

出　　处：《武汉科技学院学报》2009年第4期22-24,共3页Journal of Wuhan Institute of Science and Technology

基　　金：武汉市科学技术局科技攻关项目(20071042112)

摘　　要：采用自制的活性染料湿摩擦牢度提升剂用于活性染料中、深色染色织物,分析了影响湿摩擦牢度提升剂性能的各种应用工艺(包括固色剂用量、固色浴pH、预烘温度、焙烘温度),确定了最佳处理工艺为:湿摩擦牢度提升剂40g/l、pH6～7、预烘温度100℃×4min、焙烘温度120℃×3min。研究表明,在最佳处理工艺条件下,使用自制的湿摩擦牢度提升剂,固色后织物的耐摩擦牢度提升了1级,且色光变化较小,有利于工厂对色。The wet rubbing fastness improver prepared in our laboratory was utilized to treat the deep color cotton fabric dyed with reactive dyes.Meanwhile,the influences of various processing conditions,include fixing agent dosage、fixing bath pH、drying temperature、curing temperature,on the property of the wet rubbing fastness improver were studied.The optimal processing conditions should be auxiliaries dosage 40g/l,bath pH 6～7,drying temperature 110℃×4min and curing temperature 120℃×3min.The result shows that,in opt...

关 键 词：活性染料 湿摩擦牢度 固色 改性丙烯酸酯 

分 类 号：TS193.2[轻工技术与工程—纺织化学与染整工程]