Calculation of flash temperature for hybrid ceramic ball bearing lubricated with solid  

作　　者：李秀娟 王黎钦 古乐 齐毓霖 

机构地区：[1]Dept. of Electromechanical Engineering

出　　处：《Journal of Harbin Institute of Technology(New Series)》2002年第4期371-375,共5页哈尔滨工业大学学报（英文版）

基　　金：SponsoredbytheVistingScholarFoundationoftheMinistryofStateEducationandtheScientificResearchFouncationofHarbinInstituteofTechnolo gy(GrantNo.HIT .MD2 0 0 0 .10 ) .

摘　　要：The scuffing behavior of hybrid ceramic bearing lubricated with solid is greatly affected by the contact flash temperature. Formulas are dedused using Lee’s asperity flash temperature method, to calculate the flash temperature of ball bearing lubricated with solid. The maximum flash temperature is calculated for hybrid ceramic ball bearings. The results show that under given conditions, the flash temperature of inner race is higher than that of outer race, the flash temperature of the hybrid ceramic bearing is sensitive to the load, rotational speed and race curvature. The flash temperature of inner race at 20 000 r/min is 66 9% more than that that at 11 000 r/min, and with the load changing from 1.1 kN to 2 kN, the flash temperature inner race goes up to 165 7%. Very common for high speed ball bearings, when curvature coefficients of both inner and outer race change from 0 515 to 0 56, the inner race flash temperature decreases from 421 446℃ to 56 2℃.The scuffing behavior of hybrid ceramic bearing lubricated with solid is greatly affected by the contact flash temperature. Formulas are dedused using Lee's asperity flash temperature method, to calculate the flash temperature of ball bearing lubricated with solid. The maximum flash temperature is calculated for hybrid ceramic ball bearings. The results show that under given conditions, the flash temperature of inner race is higher than that of outer race, the flash temperature of the hybrid ceramic bearing is sensitive to the load, rotational speed and race curvature. The flash temperature of inner race at 20 000 r/min is 66 9% more than that that at 11 000 r/min, and with the load changing from 1.1 kN to 2 kN, the flash temperature inner race goes up to 165 7%. Very common for high speed ball bearings, when curvature coefficients of both inner and outer race change from 0 515 to 0 56, the inner race flash temperature decreases from 421 446℃ to 56 2℃.

关 键 词：BALL BEARING SCUFFING FAILURE SOLID LUBRICANT flash temperature 

分 类 号：TH133.33[机械工程—机械制造及自动化]