渗硫层对网格化激光淬火表面摩擦磨损性能的影响  

Effect of Sulfurizing Layer on Tribological Properties of Netted Laser-quenching Surface

作　　者：乔玉林[1] 赵玉强[1] 刘晓亭[1] 杨善林[1] 

机构地区：[1]装甲兵工程学院装备再制造技术国防科技重点实验室

出　　处：《装甲兵工程学院学报》2010年第5期73-77,共5页Journal of Academy of Armored Force Engineering

基　　金：国家自然科学基金资助项目(50775221)

摘　　要：利用低温离子渗硫技术在CrMoCu合金铸铁网格化激光淬火表面制备了渗硫层,分析了其形貌组成与结构,考察了渗硫激光复合表面的摩擦学性能。结果表明:渗硫层表面疏松多孔,在淬火区域硫化物颗粒细小,结构致密,其相组成主要为FeS;在干摩擦条件下,渗硫层能降低网格化激光淬火表面的摩擦因数,提高其耐磨性能,其主要原因是硫化物及摩擦化学反应生成的氧化物能在摩擦表面形成边界润滑膜,抑制了磨粒磨损和粘着磨损,有效减弱了网格化激光淬火表面"摩擦台阶"效应。The sulfurizing layer is prepared on the netted laser quenching surface of CrMoCu alloy cast iron by means of low temperature ion sulphuration process. The surface morphologies and phase structures of sulfide layer are analyzed by a scanning electron microscope and X-ray diffraction. The tribological properties of the sulfurizing layer are investigated under the condition of dry sliding. The experimental results reveal that the sulfurizing layer is loose and porous, and the phase structure of which is mainl...

关 键 词：网格化激光淬火 离子渗硫 渗硫层 摩擦磨损 

分 类 号：TG156.84[金属学及工艺—热处理]