提高抛丸机生产效率  

Raising Efficiency of the Shot-blasting Machine

作　　者：常会民[1] 陆江海[1] 范金刚[2] 

机构地区：[1]宝山钢铁股份有限公司,上海200940 [2]宝钢工程技术集团有限公司,上海201200

出　　处：《宝钢技术》2010年第6期74-76,共3页Baosteel Technology

摘　　要：抛丸机是酸洗线上的关键设备,它的效率直接影响到整条酸洗线的产量。原设计的抛丸机L1与酸洗线L2的通信方式要求钢板间距约为7 m左右,如果小于7 m会发生钢板信息传输出错。这样的生产节奏过于缓慢,从而严重制约了整条生产线的产能。主要阐述通过改变抛丸机L1与酸洗线L2的通信方式,将钢板间距缩短为2 m左右,从而大大提高了酸洗线的生产能力。目前的生产线产量增长了200%,钢板信息也传输正常。A shot-blasting machine is the key equipment on the pickling line.Its efficiency has great influence on the output of the whole line.The original communication between the shot-blasting machine L1 and the pickling line L2 required a 7 m distance between the two plates.If the distance was less than 7 m,the steel plate message transfer would fail.The 7 m distance made the production rhythm too slow,which seriously restricts the output of the pickling line.This paper introduces a method to change the way of co...

关 键 词：抛丸机 酸洗线 L1 L2 通信 

分 类 号：TG234.4[金属学及工艺—铸造]