检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]中国科学院上海硅酸盐研究所,上海200050
出 处:《无机材料学报》2004年第4期926-930,共5页Journal of Inorganic Materials
基 金:MOTOROLA CTRL资助
摘 要:介绍了一种采用物理方法降低Ni-Cu-Zn铁氧体材料烧结温度的工艺一粒级组配工艺。通过纳米粉体与微米粉体的合理匹配,使材料的致密化过程加速,有效地降低了材料的烧结温度,并使材料的初始磁导率保持较高值。当纳米粉体含量为10%时,Ni0.13Cu0.26Zn0.64Fe1.98O4铁氧体的烧结温度为900℃,初始磁导率达764。The processing with a physical method by using combined-size particles to decrease firing temperature for Ni-Cu-Zn ferrite was reported. As the densification process can be accelerated by selecting suitable ratio of nano-particles and micro-particles, the firing temperature was decreased and high initial magnetic permeability was held above 700 for Ni0.13Cu0.26Zn0.64Fe1.98O4 ferrite. The initial magnetic permeability of the low firing (900degreesC) ferrite prepared by combined-size powders with 10% nano-sized powders was 764.
分 类 号:TM271[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200