原位反应法制备铕配合物/NBR复合材料及其发光性能的研究  

Influence of In-situ Reaction on Luminescence Properties of Eu-complex/NBR composites

作　　者：张小萍[1] 邢立华 温世鹏[2] 

机构地区：[1]徐州工业职业技术学院材料工程系,江苏徐州221140 [2]北京化工大学 北京市新型高分子材料制备与加工重点实验室,北京100029

出　　处：《特种橡胶制品》2012年第5期27-31,共5页Special Purpose Rubber Products

摘　　要：合成了具有较好荧光性能的稀土有机配合物Eu(OAH)3(TTA),将不同用量的Eu(OAH)3(TTA)与一定量的过氧化物引发剂、NBR共混,制备了Eu(OAH)3(TTA)/NBR发光功能复合材料。SEM显示,Eu(OAH)3(TTA)在交联复合材料中的分散尺寸比在未交联复合材料中更加精细。WAXD测试表明,交联后复合材料中的Eu(OAH)3(TTA)配合物几乎不结晶,说明在硫化过程中,大部分结晶的Eu(OAH)3(TTA)配合物参与原位反应,并形成非晶的聚[Eu(OAH)3(TTA)]。交联复合材料中的分散相由纳米尺寸的聚[Eu(OAH)3(TTA)]和尺寸较大的少量残余Eu(OAH)3(TTA)颗粒组成。原位反应发生后,交联复合材料的荧光强度比相同Eu(OAH)3(TTA)含量的未交联复合材料高。The Eu(OAH)3(TTA) complex[Eu = europium,OAH = cis-9-octadecenoic acid,TTA = thenoyltrifluoroacetone] with good fluorescent property had been synthesized.The luminescent composites Eu(OAH)3(TTA)/NBR were prepared by adding different amount of Eu-complex and peroxide into the NBR matrix.Scanning electron microscopy(SEM) indicated that the dispersion dimension of the cured composite was far finer than that of the uncured composite.Wide-angle X-ray diffraction testing(WXRD) showed that the crystallinity of Eu(OAH)3(TTA) in the composites disappeared dramatically after the curing process.The dispersion phase of cured Eu(OAH)3(TTA)/NBR composites was composed almost of nanometer-sized poly[Eu(OAH)3(TTA)] and few residual Eu(OAH)3(TTA) particles.The fluorescent intensity of the cured composites was much stronger than that of the uncured ones with the same Eu(OAH)3(TTA) content due to the in-situ reaction.

关 键 词：稀土有机配合物 复合材料 原位反应 发光性能 

分 类 号：TQ325.14[化学工程—合成树脂塑料工业]