一种半集总微波低通滤波器的设计  

Design of A Semilumped Microwave Lowpass Filter

作　　者：赵智兵[1] 康文臣 

机构地区：[1]国营第七一三厂研究所,九江332002

出　　处：《空间电子技术》2012年第2期51-53,57,共4页Space Electronic Technology

摘　　要：文章设计了一种适用于发射机中功放之后抑制谐波的低通滤波器,其设计方法基于半集总参数思路。因要适合大功率场合的使用,该滤波器中所使用的电容是由介质基片上的铜皮与接地面之间形成平行板电容构成,电感则是采用线径为2mm的镀银铜线绕制而成。文中给出了该低通滤波器的设计步骤;仿真结果与测试结果基本吻合,验证了该方法的可行性,具有较强的工程实用价值。This paper designs a low-pass filter as required after power amplifiers to prevent harmonics in the transmitter,the design method is based on semi-lumped.Because the filter should handle high power of continuous wave,the capacitive elements of the filter are made up by the capacitance formed by the large areas of copper with a ground plane under the substrate,the inductors are winded with 2mm silver-coated copper wire.The paper demonstrates the design process of the low-pass filter.Agreement between simulation results and test results are attained,which validates the feasibility of this method and its great value to engineering.

关 键 词：低通滤波器 平行板电容 空心线圈 大功率 

分 类 号：TN7[电子电信—电路与系统]