中空二氧化硅超疏水涂层的制备  

Preparation of Hollow Silicasuper Hydrophobic Coating

作　　者：徐文华[1] 赵利[1] 韩志航[1] 姚金水[1] 柏冲[1] 刘金秋[1] 刘伟良[1] 

机构地区：[1]山东轻工业学院材料科学与工程学院,山东济南250353

出　　处：《山东轻工业学院学报（自然科学版）》2013年第1期1-3,共3页Journal of Shandong Polytechnic University

基　　金：山东省自然基金资助项目(ZR2012EMM009);济南留学人员创业计划(20100406)

摘　　要：以聚丙烯酸、正硅酸乙酯和氨水为原料制备了中空二氧化硅球,随后使用甲基三甲氧基硅烷(MTMS)进行表面修饰,最后通过简单的涂覆法得到了接触角为156°,滚动角小于5°的超疏水涂层,通过亲水亲油性测试、扫描电子显微镜和透射电子显微镜等对产物结构和性能进行了分析。结果表明,MTMS成功的对中空二氧化硅球进行了改性。Hollow silica nanoparticles have been prepared by using polyacrylic acid,tetraethoxysilane and ammonia solution,and a superhydrophobic coating with the maximum static water contact angles of 156° and the sliding angles of less than 5° was obtained by basing on methyltrimethoxysilane(MTMS) modified hollow silica.The structures and properties of the products were characterized by hydrophobic investigation,scanning and transmission electron microscopes.The results indicated that the hollow silica could be modified by MTMS successfully.

关 键 词：中空 二氧化硅 改性 超疏水 

分 类 号：TB306[一般工业技术—材料科学与工程]