耐高温油井水泥降失水剂FAN的性能研究  

Study on Performances of Cement Fluid Loss Additive FAN with High Temperature Resistance

作　　者：国安平[1] 李晓岚[1] 孙举[1] 杨国涛[1] 张宗铄 

机构地区：[1]中原石油勘探局钻井工程技术研究院 [2]中原油田天然气处理厂,濮阳457001

出　　处：《精细石油化工进展》2013年第2期5-7,16,共4页Advances in Fine Petrochemicals

摘　　要：对以2-丙烯酰胺基-2-甲基丙磺酸(AMPS)、N-乙烯基吡咯烷酮(NVP)和丙烯酰胺(AM)为单体合成的油井水泥降失水剂FAN进行性能评价,结果表明,FAN具有较好的耐高温降失水能力和一定的缓凝性能,且对水泥石早期强度的发展影响不大。FAN掺量为0.5%的水泥浆在160℃时失水量小于100 mL,在110℃,21 MPa条件下养护24 h的抗压强度达26.1MPa。分析了降失水剂FAN的降失水机理。The performances of fluid loss additive FAN were evaluated,which was synthesized from 2-acrylamido-2-methyl propane sulfonic acid(AMPS),N-vinyl pyrrolidone(NVP),and acrylamide.The results showed that FAN had good fluid loss control ability under high temperature,slight retarding performance,and little effect on the strength of the cement in early stage.The fluid loss of the cement mortar containing 0.5% FAN could be controlled less than 100 mL under 160 ℃ and the compressive strength could reach up to 26.1 MPa after curing 24 hours under 110 ℃,21 MPa.The mechanism of fluid loss control of FAN was also analyzed.

关 键 词：降失水剂 固井 油井水泥 耐高温 

分 类 号：TE256[石油与天然气工程—油气井工程]