雾化水性聚氨酯模拟气溶胶凝并实验研究  

Experimental Study on Simulative Aerosol Coagulation Under Waterborne Polyurethane Spraying

作　　者：赵颜红[1] 刘福强[1] 刘艳[1] 陈晓谋[1] 罗德礼[1] 

机构地区：[1]中国工程物理研究院,四川绵阳621900

出　　处：《中国粉体技术》2013年第6期64-68,共5页China Powder Science and Technology

摘　　要：通过比较室内不同粒径范围的颗粒物在自然沉降、水雾化及水性聚氨酯雾化3种状态下气溶胶浓度减半所需的半值时间,计算相应的凝并系数,研究室内水性聚氨酯雾化后对模拟气溶胶粉尘颗粒物的凝并及去除效果.结果表明,与自然凝并和水雾化相比,在0.6～40.0 μm粒径范围内,水性聚氨酯溶液雾化后模拟气溶胶颗粒的半值时间分别缩短35.3％、40.6％;在2.0～105.0 μm范围内,半值时间分别缩短10.3％、26.2％.By comparing the half time halved in the aerosol concentrations needed by particles in various granularity ranges at 3 different conditions including natural coagulation,water spraying and waterborne polyurethane spraying, the corresponding coagulation coefficients were calculated, coagulation and removal efficiency of simulative powdery aerosol particulates with waterborne polyurethane spraying in room were studied. The results show that comparing with the nature coagulation and water spraying,the half time is shortened by 35.3% and 40.6% after waterborne polyurethane spraying at the granularity range from 0.6 to 40.0 μm,the half time is shortened by 10.5% and 26.2% at the granularity range from 2.0 to 105.0 μm.

关 键 词：水性聚氨酯 雾化 气溶胶 凝并 半值时间 

分 类 号：R122.2[医药卫生—环境卫生学] X50[医药卫生—公共卫生与预防医学]