超长涤纶短纤维针刺土工布性能研究  

Study on properties of long polyester staple fiber needle-punched nonwoven geotextile

作　　者：李素英[1] 张瑜[1] 范立元 任煜[1] 顾闻彦[1] 于树发 

机构地区：[1]南通大学纺织服装学院,南通226007 [2]江苏迎阳无纺机械有限公司,常熟215539

出　　处：《产业用纺织品》2014年第1期14-17,共4页Technical Textiles

基　　金：中国纺织工业协会科技指导性项目(2009067)

摘　　要：以长度为51、65和150 mm的涤纶短纤维为原料,采用非织造针刺技术加工制得土工布。研究了原料纤维长度、针刺密度和针刺深度对土工布力学性能、厚度、垂直渗透系数的影响。结果表明:增加土工布原料纤维长度可以明显提高土工布力学性能;合理地选择针刺深度和针刺密度,有助于提高土工布的力学性能及透水性能。The needle-punched nonwoven geotextile was made using PET fibers of 51, 65 and 150 mm.The influence of process parameters such as length of the fiber , punching density and depth of needle penetration on mechanical properties , thickness and vertical permeability coefficient of geotextile was discussed .The results show that the mechanical properties of the nonwoven geotextile increased significantly with the increase of the PET fiber length .The reasonable choice of the process parameters could enhance the mechanical and hydraulic conductivity properties of the nonwoven geotextile .

关 键 词：针刺土工布 涤纶超长短纤维 力学性能 透水性能 

分 类 号：TS176.3[轻工技术与工程—纺织材料与纺织品设计]