高强度钢干切削加工表面粗糙度几何轮廓特征分析  

The characterization of roughness geometry profiles induced by dry cutting process

作　　者：辛民[1] 龙震海[2] 

机构地区：[1]中国神华能源股份有限公司铁路货车运输分公司技术部,北京100011 [2]北京理工大学机械与车辆学院,北京100081

出　　处：《制造技术与机床》2014年第2期94-96,共3页Manufacturing Technology & Machine Tool

基　　金：国家自然科学基金项目资助(50975030)

摘　　要：为考查高强度材料在干切削条件下,边界润滑条件的改变对已加工表面粗糙度曲线的几何特征参数R a、R y、ADF、t p的影响规律,对高强度钢30CrMnSiA进行了外圆车削切削速度单因素试验。研究表明:干切削对比油润滑时,车削加工表面粗糙度指标R a和R y的变化均不明显;粗糙度轮廓的高度分布会存在一定差别,ADF曲线有所不同;轮廓支承长度率t p曲线受切削速度影响显著。In order to investigate the effect of cutting condition on the characteristics of surface profiles,the dependency of roughness values( R a and R y),amplitude density function( ADF) and bearing length rate t p on cutting speeds at different feed rates were studied by dry turning of a high strength steel, 30CrMnSiA. It is concluded that,the differences of surface roughness R a and R y between dry cut and wet cut are not significant; the height distribution character of surface profiles varies according to the lubrication and cooling condition; cutting speed has influences on the curves of ADF and bearing length ratio no matter under dry cut and wet cut conditions.

关 键 词：干切削 高速切削 承载能力 高强度钢 

分 类 号：TG51[金属学及工艺—金属切削加工及机床]