Distribution threshold values of CaCl_2 onto the 10X-zeolite and macro-pore silica gel  

作　　者：TANG YouCheng1,2,LI Bin1,YANG JingChang1,CHU Wei1 & LUO ShiZhong1 1 School of Chemical-Engineering,Sichuan University,Chengdu 610065,China 2 Sichuan Xinguang Silicon Technology Corporation Limited,Leshan 614000,China 

出　　处：《Science China Chemistry》2009年第2期231-235,共5页中国科学（化学英文版）

基　　金：Supported by the National Natural Science Foundation of China (Grant No. 20576080)

摘　　要：The calcium chloride used for adsorption separation of ammonia is promising for its large adsorptive capacity and lower desorption temperature,but difficult to develop because of the liable expansion,lump and chip in the adsorption/desorption process.Composite adsorbents made by monolayer dis-persion of calcium chloride onto carriers with high surface areas exhibit better adsorptive capacity and stability.Several models were developed to confirm the maximum monolayer dispersion capacity of calcium chloride onto the carriers(the distribution threshold value),and the closely packed monolayer dispersion model was considered the most suitable for this study.The distribution threshold values given by this model were 0.60 g CaCl2/(g 10X-zeolite) and 0.38 g CaCl2/(g SiO2).When the divalent salt was dispersed onto the carriers,however,anions were separated into two types,causing that the en-tropy of the system tended to increase and the system was not stable.To minimize the entropy,a new model was put forward as the modified closely packed monolayer dispersion model.Based on this model,the distribution threshold values are 0.52 g CaCl2/(g 10X-zeolite) and 0.33 g CaCl2/(g SiO2),re-spectively.The distribution threshold values were also gained experimentally by XRD quantitative phase analysis:0.61 g CaCl2/(g 10X-zeolite) and 0.31 g CaCl2/(g SiO2).Comparison between experi-mental values of distribution threshold with theoretical ones based on two different model showed that the closely packed monolayer dispersion model fits the monolayer dispersion of calcium chloride onto micro-pore carrier - 10X-zeolite,and the modified closely packed monolayer dispersion model is more suitable for the bigger aperture carrier - macro-pore silica gel.The calcium chloride used for adsorption separation of ammonia is promising for its large adsorptive capacity and lower desorption temperature,but difficult to develop because of the liable expansion,lump and chip in the adsorption/desorption process.Composite adsorbents made by monolayer dis-persion of calcium chloride onto carriers with high surface areas exhibit better adsorptive capacity and stability.Several models were developed to confirm the maximum monolayer dispersion capacity of calcium chloride onto the carriers(the distribution threshold value),and the closely packed monolayer dispersion model was considered the most suitable for this study.The distribution threshold values given by this model were 0.60 g CaCl2/(g 10X-zeolite) and 0.38 g CaCl2/(g SiO2).When the divalent salt was dispersed onto the carriers,however,anions were separated into two types,causing that the en-tropy of the system tended to increase and the system was not stable.To minimize the entropy,a new model was put forward as the modified closely packed monolayer dispersion model.Based on this model,the distribution threshold values are 0.52 g CaCl2/(g 10X-zeolite) and 0.33 g CaCl2/(g SiO2),re-spectively.The distribution threshold values were also gained experimentally by XRD quantitative phase analysis:0.61 g CaCl2/(g 10X-zeolite) and 0.31 g CaCl2/(g SiO2).Comparison between experi-mental values of distribution threshold with theoretical ones based on two different model showed that the closely packed monolayer dispersion model fits the monolayer dispersion of calcium chloride onto micro-pore carrier — 10X-zeolite,and the modified closely packed monolayer dispersion model is more suitable for the bigger aperture carrier — macro-pore silica gel.

关 键 词：THRESHOLD value MONOLAYER DISPERSION model 10X-zeolite macro-pore SILICA GEL 

分 类 号：O611.3[理学—无机化学]