Effects of TMCP Parameters on the Microstructure and Mechanical Properties of Nb-Bearing Spring Steel  

作　　者：ZHANG Chao-lei,LIU Ya-zheng,ZHOU Le-yu,JIANG Chao,SUN Xiao-jun (School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 10083,China) 

出　　处：《Journal of Iron and Steel Research International》2011年第S1期581-584,共4页

摘　　要：The effects of TMCP parameters,such as finish rolling temperature and cooling rate on the microstructure and mechanical properties of Nb-bearing spring steel were investigated by thermal simulation,quantitative metallography and tensile test.And the precipitation in Nb-bearing spring steel was analysis by electron microscopy.Experimental results indicate that the higher finish rolling temperature or the more rapid cooling rate in a given range,the less the proeutectoid ferrite content and the thinner the interlamellar spacing is.Reasonably higher finish rolling temperature followed by properly higher cooling rate is suggested to improve the mechanical properties of Nb-bearing spring steel.Micro-addition of niobium decreases the proeutectoid ferrite content and the interlamellar spacing and leads to forming degenerated pearlite.The precipitation of size range ～20-50 nm in Nb-bearing spring steel occurred at the lamellar ferrite of pearlite and the proeutectoid ferrite.The effects of TMCP parameters,such as finish rolling temperature and cooling rate on the microstructure and mechanical properties of Nb-bearing spring steel were investigated by thermal simulation,quantitative metallography and tensile test.And the precipitation in Nb-bearing spring steel was analysis by electron microscopy.Experimental results indicate that the higher finish rolling temperature or the more rapid cooling rate in a given range,the less the proeutectoid ferrite content and the thinner the interlamellar spacing is.Reasonably higher finish rolling temperature followed by properly higher cooling rate is suggested to improve the mechanical properties of Nb-bearing spring steel.Micro-addition of niobium decreases the proeutectoid ferrite content and the interlamellar spacing and leads to forming degenerated pearlite.The precipitation of size range ～20-50 nm in Nb-bearing spring steel occurred at the lamellar ferrite of pearlite and the proeutectoid ferrite.

关 键 词：spring steel NIOBIUM controlled rolling and cooling MICROSTRUCTURE mechanical properties 

分 类 号：TG142.41[一般工业技术—材料科学与工程]