注塑冷却系统中管网基本圈的优化  

Optimization of the Basic Cycle of Pipe Net in the Cooling System of Injection Molding

作　　者：石宪章[1] 田中[1] 申长雨[1] 

机构地区：[1]郑州大学橡塑模具国家工程研究中心,河南郑州450002

出　　处：《中国塑料》2004年第5期90-92,共3页China Plastics

摘　　要：采用图论有关知识 ,在注塑冷却系统中选择合理的管网基本圈 (回路 ) ,提出了一种基本圈优化的方法 ,使基本圈经优化后得到长度最小的回路 ,这种方法有助于改善冷却管网分析结果。Reasonable basic cycles(circuits) of the networks of cooling conduit in a injection molding system were selected according to Graph Theory.One method of optimizing these basic cycles was introduced.Circuits with minimal length were figured out with this method,which helps to improve the analytic result of the networks of cooling conduit in the injection molding system.

关 键 词：冷却系统 基本圈 管网 

分 类 号：TQ320.662[化学工程—合成树脂塑料工业]