板坯连铸结晶器水模型内吹气流动和夹杂物粒子去除模拟  

Simulation of Flow and Removal of Inclusion Particles in Water Modeling of Slab Continuous Casting Mold with Gas Blowing

作　　者：狄瞻霞[1] 倪冰[1] 韩立浩[1] 罗志国[1] 邹宗树[1] 

机构地区：[1]东北大学材料与冶金学院,辽宁沈阳110004

出　　处：《过程工程学报》2009年第S1期329-332,共4页The Chinese Journal of Process Engineering

摘　　要：利用数值模拟方法研究了连铸结晶器水模型内吹气作用下的流动和夹杂物粒子去除效果,分析了吹气量对结晶器内流动和夹杂物粒子去除的影响规律.研究结果表明,吹气可增加整个上回流的向上运动趋势,尤其是靠近水口附近的流动;随着吹气流量增大,自由液面波动减弱;夹杂物粒子上浮率增加,在2,4和6L/min气流量下,夹杂物粒子去除率比无气体吹入时分别提高3.4%,5.9%和9.6%.The numerical simulation study on flow field and inclusion particles removal was carried out with the water model of mold. The effects of gas flow rate on flow field and inclusion removal rate were investigated. The results showed that the gas injection could increase the rising tendency of upper circulating area, especially the flow near the nozzle. The level fluctuation in the surface decreased as the gas flow rate increased. The removal rate of inclusion particles increased when the gas flow rate increased. When the gas flow rate increased from 2 L/min to 6 L/min, the removal rate was increased by 3.4%, 5.9%, and 9.6% compared with that without gas.

关 键 词：结晶器水模型 吹气 夹杂物粒子 数值模拟 

分 类 号：TF777.1[冶金工程—钢铁冶金]