Al元素对310S耐热钢组织和力学性能的影响研究  

Effect of Aluminum on Microstructure and Mechanical Properties of 310S Steel

作　　者：喇培清[1] 刘闪光[1] 

机构地区：[1]兰州理工大学有色金属新材料国家重点室,兰州730050

出　　处：《材料工程》2009年第S1期36-40,共5页Journal of Materials Engineering

基　　金：国家自然科学基金资助项目(50674051)

摘　　要：通过WS-4非自耗真空电弧炉熔炼制备了加Al 2%~10%(质量分数)的耐热钢310S(Cr25Ni20),用光学金相显微镜观察了金相组织,用EPMA-1600电子探针分析了组织中各元素的分布,结合D8 ADVANCE型X射线衍射确定了合金中的相组成,并进行了室温压缩和硬度力学性能试验。结果表明,随着铝含量增加,碳化物由连续条状转变为质点状;Al元素固溶于基体中,基体相为γ相;当Al含量大于6%时,基体相为α相,合金脆性大幅提高,合金由塑性材料转变为脆性材料。310S based steels with 2%-10% Al were prepared by the WS-4 non-consumption of vacuum arc furnace.The microstructure of the alloys was investigated by optical microscope.Distribution of elements in the steels was analyzed by electron probe microanalyzer(EPMA-1600).Phases of the steels were examined by X-ray diffraction.And the compression and hardness of the steels at room temperature were tested.The results showed that phase of the steels transformed from γ-Fe to α.The interconnected chromium carbide transformed to isolated plates with Al content increasing.The Al element dissolved in the matrix phases.When the Al content was more than 6%,and the alloy stranfored plastic materials to brittle materials.

关 键 词：310S耐热钢 AL元素 显微组织 力学性能 

分 类 号：TG142.1[一般工业技术—材料科学与工程]