靶板等效方法研究  

Study on Equivalent Target Experimental Methods

作　　者：曹兵[1] 

机构地区：[1]南京理工大学,南京210094

出　　处：《弹箭与制导学报》2003年第S4期122-123,共2页Journal of Projectiles,Rockets,Missiles and Guidance

摘　　要：给出了目标等效靶的建立方法和原则,认为在建立目标等效靶时应遵循毁伤效应等效的原则。通过实验证明了强度等效理论的误差约在40%左右,需要进一步通过实验修正才可在工程上应用。并指出对于侵彻等效来讲,应保证等效靶与原靶板抵抗同一破片侵彻的能力相同,即应保证同一破片对它们的极限穿透速度相等。The method and principle to establish equivalent targets of objectives have been given out in this paper.When estab- lishing equivalent targets of objectives,the principle of damage effect equivalent should be followed.Experiments have proved that the error of strength equivalent theory is about 40% or so,So further improvement must be made so as to be used in pro- jects.And pointing out that,as to penetration equivalent,the anti-penetration ability of the equivalent target and the prototype target by the same fragment should be insured equal,that is,the limit penetration velocity of the same fragment to than should be equal.

关 键 词：等效靶 模拟 实验方法 侵彻 

分 类 号：TJ410[兵器科学与技术—火炮、自动武器与弹药工程]