大型轧机油膜轴承锥套损伤问题研究  

Research on the Sleeve Fraying of Oil Film Bearings of large Rolling Mills

作　　者：黄庆学[1] 静大海[1] 申光宪[2] 李慧剑[2] 许将[3] 李汉良[3] 

机构地区：[1]太原重型机械学院,太原030024 [2]燕山大学工程力学系,河北秦皇岛066004 [3]宝山钢铁股份有限公司,上海200941

出　　处：《太原科技大学学报》2002年第S1期17-21,共5页Journal of Taiyuan University of Science and Technology

基　　金：国家"九五"重点科技攻关项目 ( 95 5 5 2 80 1- 0 2 0 1)

摘　　要：本文利用弹塑性接触问题边界元法分析了轧机油膜轴承锥套与轧辊颈装配过程中的变形和载荷特性 ,讨论了接触应力和变形对锥套与辊颈损伤的影响 ,给出了防止锥套与辊颈装配过程损伤改进的具体措施。Various kinds of oil film bearings have found wide use in modern mills.Under rolling pressure,the performance of oil film bearings'taper sleeve and liner plays an important role in the reliability and safety of the bearings.Taper sleeve and liner contact comes in three ways:keyed jointing,elastic plastic contact with accessory,elastic plastic contact withour accessory.The third way features stable load transmission,and no derivative rolling pressure amplitude wave because the rolling pressure is tranmitted through the elastic binding force from interference fit and thus the taper sleeve's peripheral rigidity remains even.Accessoryless elastic plastic contact taper sleeve,which is used in the support roller of 1580PC mill of Baogang in Shanghai,is a patent product of Mitsubish Heavy Industries Ltd of Japan. Because the interference fit of the sleeve and the roller neck of the mill is assembled through hydraulic expansion,the contact surface between the sleeve and the roller neck poses a complex 3 dimensional mechanics problem,which is now a focus in the study of solid mechanics.A theoretical analysis of its mechanical behavior will help to determine the mechanics of fish tail,spot erosion and other surface damages resulting from assembly of sleeve and roller neck,and the mechanics of adhesion in the process of rolling,to reduce wear of the contact surface between the sleeve and the roller neck,to optimize linkage mode of sleeve and roller neck,and improve the performance of oil film bearings.The paper employs BEM for elastic plastic contact problems to study the contact problem of sleeve and roller neck under the special way of assembly,discusses contact distribution,the influence of expansion oil pressure on contact stress and deformation of the sleeve,and the characteristics of the stress field under combined action of expansion oil pressure and shrink range.

关 键 词：油膜轴承 边界元法 锥套损伤 

分 类 号：TG33[金属学及工艺—金属压力加工] TH133.3[机械工程—机械制造及自动化]