In-situ Observation of Initiation and Propagation of Cleavage Microcrack in TiAl  

作　　者：GAO, KW CHEN, QH CHU, WY HSIAO, CM 

出　　处：《Journal of Materials Science & Technology》1995年第1期11-14,共4页材料科学技术（英文版）

摘　　要：Nucleating and propagating of nanocrack formed in dislocation free zone (DFZ) for the brittle TiAl alloy has been studied through in-situ tensile test in TEM and analyzed using microfracture mechanics. The results show that a lot of dislocations can be emitted from a crack tip when the applied stress intensity K-la is larger than the stress intensity for dislocation emission K-le = 1.4 MPa . m(1/2) and a dislocation free zone, which sometimes is a close zone, can form after reaching equilibrium. The DFZ is a elastic zone with large strain and then the stress in the DFZ might equal to the cohesive strength sigma(th) because the crack tip is still sharp. When K-la is larger than the stress intensity for nanocrack nucleation K-li = 2.4 MPa . m(1/2), the stress within a certain range in the DFZ would equal to sigma(th) and then a nanocrack initiates in the DFZ or sometimes at the notch tip. The nanocrack formed in the DFZ is stable and can propagate a small distance in cleavage mode through multiplication and movement of dislocation in the plastic zone, during keeping constant displacement. Increasing K-la, can make the crack stably propagate continuously or discontinuously and it means that the stress intensify for crack propagation, K-lp, is larger than K-li. Therefore, K-le [K-li [K-lp [K-lC.Nucleating and propagating of nanocrack formed in dislocation free zone (DFZ) for the brittle TiAl alloy has been studied through in-situ tensile test in TEM and analyzed using microfracture mechanics. The results show that a lot of dislocations can be emitted from a crack tip when the applied stress intensity K-la is larger than the stress intensity for dislocation emission K-le = 1.4 MPa . m(1/2) and a dislocation free zone, which sometimes is a close zone, can form after reaching equilibrium. The DFZ is a elastic zone with large strain and then the stress in the DFZ might equal to the cohesive strength sigma(th) because the crack tip is still sharp. When K-la is larger than the stress intensity for nanocrack nucleation K-li = 2.4 MPa . m(1/2), the stress within a certain range in the DFZ would equal to sigma(th) and then a nanocrack initiates in the DFZ or sometimes at the notch tip. The nanocrack formed in the DFZ is stable and can propagate a small distance in cleavage mode through multiplication and movement of dislocation in the plastic zone, during keeping constant displacement. Increasing K-la, can make the crack stably propagate continuously or discontinuously and it means that the stress intensify for crack propagation, K-lp, is larger than K-li. Therefore, K-le [K-li [K-lp [K-lC.

分 类 号：O614[理学—无机化学]