检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张铭强[1] 林涛[1] 廖俊强 张虹[1] 王建平[1]
机构地区:[1]福建省三明市疾病预防控制中心
出 处:《环境卫生学杂志》2013年第5期416-419,共4页JOURNAL OF ENVIRONMENTAL HYGIENE
摘 要:目的对某蓄电池厂职业危害程度和控制效果进行卫生学评价,对该厂的职业病防控提出建议。方法按照职业危害控制效果卫生学评价方法,调查该厂厂址、设备布局和管理措施等基本情况,检测作业岗位职业病危害因素,判定该厂职业危害控制效果是否合格。结果该厂厂址和设备布局基本符合要求;一氧化碳、煤尘和WBGT指数合格率为100%,噪声和照度合格率为95%,硫酸和铅尘合格率为0,铅烟合格率为14.3%;空气中硫酸超标0.35~0.60倍,铅超标8.44~175.67倍。结论厂方须对硫酸和铅作业岗位的职业危害控制措施进行认真整改。Objectives To evaluate the extent and effectiveness of controlling occupational hazards in a storage battery factory and to provide suggestions for the prevention and control of occupational diseases. Methods The factory sites,equipment layout,management measures and other basic situations of the factory were surveyed, and the factors for occupational hazards in work posts were tested to determine whether the results of occupational hazard control were qualified or not. Results The factory sites and equipment layout of the factory basically met the requirements. The qualified rates for carbon monoxide,coal dusts and WBGT index were 100%,and the qualified rates for noise and illumination were 95%. The qualified rates for sulfuric acid and lead dusts were 0. The qualified rate for lead smoke in the air was 14. 3%. The concentrations of sulfuric acid and lead in the air were 0. 35 ~ 0. 60 times and 8. 44 ~ 175. 67 times over the standard limits,respectively. Conclusions The manufacturer should take rectified and corrective measures seriously on the control of occupational hazards in sulfuric acid and lead work posts.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.112