新型叠合板拼缝构造措施的试验研究及有限元分析  

EXPERIMENTAL STUDY AND FINITE ELEMENT ANALYSIS OF STRUCTURAL MEASURES FOR JOINTS BETWEEN NEW TYPE OF SUPERPOSED SLABS

作　　者：吴方伯[1] 刘彪[1] 李钧[1,2] 邓利斌[1,2] 黄璐 

机构地区：[1]湖南大学土木工程学院,长沙410082 [2]湖南高岭建设集团股份有限公司,长沙410153 [3]广州容柏生建筑结构设计事务所,广州510170

出　　处：《工业建筑》2015年第2期50-56,75,共8页Industrial Construction

基　　金：国家自然科学基金项目(51278179);长沙市科技计划重点项目(K1205229-11)

摘　　要：为改善双向受力叠合楼板在拼缝处的受力性能,提出一种新的拼缝构造措施。并进行了1根无拼缝叠合模型板带、1根有拼缝但无拼缝加强措施的叠合板带及1根有拼缝且进行拼缝加强处理的叠合板带的静力加载试验。试验结果表明:拼缝不进行加强处理的叠合板易发生沿自然粗糙叠合面撕裂的现象;拼缝处设置的抗裂钢筋能有效抑制拼缝的开展,提高其极限承载力,但对开裂后刚度的影响较小。采用有限元程序ABAQUS 6.11对试验试件进行模拟计算,计算结果与试验结果吻合良好;通过数值计算,研究了拼缝数量变化对模型板带受力性能的影响,为深入开展预制带肋底板混凝土叠合楼板的研究提供参考。A new type of structural measure was put forward to improve the mechanical property of the flat-fell seam in two-way concrete composite floor.Monotonic tests were conducted on a composite slab strip, a composite slab strip with the flat-fell seam but no enhancing measures and a composite slab strip with enhancing measures on the flat-fell seam.The test results showed that lamination tears phenomenon was easily occurred on untreated rough surface when the joints in the composite slabs were not enhanced.After the crack-resisting steel bar was set on the joint, the limit bearing capacity of the slab strip would be greatly increased, but its effect on the short-period stiffness after cracking was little.The element analysis by ABAQUS 6.11 program was conducted and the results between test and analysis were close;the impact of in the number of joints on the specimen's mechanical performance was also studied, which provided a basis for the further investigation of concrete superposed floor slabs.

关 键 词：拼缝构造措施 叠合面 叠合楼板 静力试验 有限元分析 

分 类 号：TU37[建筑科学—结构工程]