SS400钢薄板坯连铸生产典型漏钢原因分析和控制  

Reason analysis and control of typical steel leakage of thin slab continuous casting production of SS400 steel

作　　者：季德静[1] 李春阳[2] 苏家男 

机构地区：[1]吉林电子信息职业技术学院,吉林吉林132021 [2]中钢吉铁吉林铁合金股份有限公司,吉林吉林132021

出　　处：《中国冶金》2015年第1期41-44,共4页China Metallurgy

摘　　要：根据某厂连铸薄板坯生产SS400钢过程中出现的典型漏钢现象进行分析,通过化学成分分析、连铸操作参数分析、FDA曲线分析、漏钢图片分析找到漏钢的真正原因,这次漏钢主要属于卷渣漏钢,采取了有效措施以避免以后发生类似生产事故。措施1是炼钢作业区保证连浇炉次中间包钢水过热度在15~35℃范围内;措施2是降低拉速时要求按照规定每次降低按0.1m/min进行操作,以保障生产顺行,提高连铸机作业率。Based on the production of SS400 steel by continuous casting slab in a certain factory,the typical steel leakage phenomenon was analyzed through chemical composition analysis,continuous casting parameters analysis,the FDA curve analysis,steel image analysis and the real reason for the leakage of steel was found.It was mainly caused by the leakage of steel slag,and effective measures were taken to prevent similar production accidents in the future.Measures included:to ensure the overheat temperature of the molten steel in the tundish between 15 to 35℃in the steelmaking section;in accordance with the relevant provisions of 0.1m/min every time when reduce speed to ensure the smooth production and improve the continuous casting machine operation efficiency.

关 键 词：SS400钢 卷渣漏钢 作业率 

分 类 号：TF777[冶金工程—钢铁冶金]