低碳贝氏体微观组织形态对冲蚀磨损性能的影响  

Effects of Microstructure and Morphology on Slurry Erosion Performance of Low- Carbon Bainitic Steels

作　　者：华晨[1] 徐颖[1,2] 程先华[1,3] 

机构地区：[1]上海交通大学机械与动力工程学院,上海200240 [2]上海师范大学信息与机电工程学院,上海201418 [3]中国科学院兰州化学物理研究所固体润滑国家重点实验室,甘肃兰州730000

出　　处：《摩擦学学报》2015年第2期121-130,共10页Tribology

基　　金：固体润滑国家重点实验室开放基金项目资助(LSL-1401)~~

摘　　要：通过热处理改变低碳贝氏体钢中的奥氏体及其转变物(下称M/A)分布形态,调整钢响应载荷时的微观应力集中位置,并用弹塑性力学理论揭示了贝氏体钢较高的抗冲蚀磨损性能的力学机理.对比研究了相同化学成分贝氏体、珠光体和马氏体的冲蚀磨损性能,发现珠光体和马氏体因强度、韧塑性无法达到最佳匹配,其抗冲蚀磨损性能均不如贝氏体.在贝氏体钢中,粒状M/A贝氏体的应力集中位置使得冲蚀裂纹显著地向试样心部扩展,降低了抗冲蚀磨损能力.薄膜状M/A贝氏体的应力集中位置不利于表面裂纹向试样心部生长,实现了较高的抗冲蚀磨损性能.An improved resistance of a low- carbon bainitic steel to slurry erosion was achieved by utilizing a heat treatment to alter the distribution map of M / A constituent,which refered to austenite and its transformation products. In light of elastic and plastic theorems such an improvement was attributed to that one particular M / A distribution had the capability to optimize the stress concentration intensity and therefore the erosion performance. The steel studied here was transformed into four different metallurgical structures: bainite with thin- film M / A,bainite with granular M / A,pearlite and martensite. It is found that pearlite and martensite had the worst erosion resistance due to the mismatch of strength and toughness,and that bainite with granular M / A also had a relatively low erosion resistance since the cracks on the erosion surface grew into the inner part of the steel resulting from the point of stress concentration itself extending inwards. Bainite with thin- film M / A,however,had the best erosion resistance because the particular stress concentration prevented cracks from propagating inwards.

关 键 词：低碳贝氏体 等温淬火 冲蚀磨损 应力集中 弹塑性分析 

分 类 号：TG142.1[一般工业技术—材料科学与工程]