中硬无烟煤综放工作面煤层注水工艺及效果  

Technique and Efficiency of Medium Hard Anthracite Fully Mechanized Caving Face Water Injection

作　　者：和勇中 赵国飞[2,3] 康天合[2] 

机构地区：[1]山西兰花科技创业股份有限公司唐安煤矿分公司,山西晋城048400 [2]太原理工大学采矿工艺研究所,太原030024 [3]山西煤炭管理干部学院,太原030006

出　　处：《煤炭技术》2015年第3期23-25,共3页Coal Technology

基　　金：山西省自然科学基金项目(2014011035-2)

摘　　要：针对中硬无烟煤综放工作面煤层注水降尘效果差的难题,在研究中硬无烟煤渗透规律的基础上,采取一定的注水技术措施,充分保证了中硬无烟煤综放工作面的降尘效果。实测数据分析显示:采用该套注水工艺后,采煤机司机处降尘率为65.9%;采煤机下风侧10~15 m处降尘率为62.2%;回风巷20~25 m处降尘率为54.8%,降尘效果显著。工程实践表明,该套注水工艺解决了中硬无烟煤综放工作面煤层注水降尘的难题,可为类似工程条件下的煤层注水提供一定的指导。In allusion to poor effect problem by medium hard anthracite fully mechanized caving face water injection and dust suppression, on the study of medium hard anthracite permeability rule,adequate assurance better dust suppression effect by some injection technology. The in situ measurement indicates that dust reduction rate of the area around coal cutter driver is 65.9%, that at the place 10~15 m below the coal cutter is 62.2%, and that place 20~25 m in air return roadway is 54.8%. Practical application shows that the injection technology of solved the problem which in medium hard anthracite fully mechanized caving face water injection and dust suppression, could provide certain guiding significance for water injection under similar engineering conditions.

关 键 词：中硬无烟煤 综放工作面 煤层注水 降尘 

分 类 号：TD714.4[矿业工程—矿井通风与安全]