钢丝绳芯胶带热硫化胶接工艺的改进  

The Improvement on Heat Vulcanizing Process of Steel Core Belt

作　　者：方志坚[1] 

机构地区：[1]江西铜业集团德兴铜矿大山选矿厂,江西德兴市334224

出　　处：《矿业研究与开发》2015年第1期96-98,共3页Mining Research and Development

摘　　要：针对钢丝绳芯胶带胶接头经常出现钢丝绳松动、带面鼓包、严重时带面撕毁等问题,通过多年试验、总结,在热硫化胶接的工作环境、工艺技术、硬件设施、人员素质等方面进行了改进和规范,提出一套可行、可靠,质量好、胶接时间短的胶接工艺和质量控制措施,使胶接头检修时间由3d缩短为1d,同时延长胶带寿命2a,创造了较好的经济效益和社会效益。Rubber joint of steel core belt always has many problems,such as the looseness of wire rope,bulge,even destruction.Aimed at these problems,the working environment,technology,hardware facility and personnel quality of heat vulcanizing jointing were improved and standardized.Furthermore,a feasible jointing process with good quality and short time as well as quality control measures were put forward through tests and experiences of many years.Finally,the repair time of rubber joint was shortened from 3days to 1day and the using time of belt was prolonged by 2years,which created better economic benefit and social benefit.

关 键 词：钢丝绳芯胶带 硫化胶接工艺 剥皮机 预成型胶 

分 类 号：TD528.1[矿业工程—矿山机电]