检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:郭少锋[1] 陆启生[1] 邓少永[1] 黎全[1] 汪晓波[1]
机构地区:[1]国防科学技术大学理学院,湖南长沙410073
出 处:《强激光与粒子束》2004年第7期817-820,共4页High Power Laser and Particle Beams
基 金:国家863计划项目资助课题
摘 要: 采用高速PIN光电探测器和高带宽的数字存储示波器,实时检测透射光脉冲和散射光脉冲的变化特征,并将之用作材料破坏的光学判据,测量得到K9玻璃在1.06μm纳秒脉冲激光作用下的能量损伤阈值约18mJ,相应的能量密度阈值为1.0kJ/cm2。通过分析透射光脉冲和散射光脉冲的特征,给出了材料的破坏时刻,并推断出K9玻璃所能承受的极限光强为1015W/m2。研究了能量透过率与泵浦能量的关系,并初步探讨了透明材料的破坏机理。结果表明:在多纵模激光的作用下,透明光学材料破坏是电离击穿与自聚焦效应综合作用的结果。Experiment system to measure the damage thresholds of K9 glass irradiated by ns pulsed laser is established. Strong attention is paid to the method to detect the precusor of the damage. The sharp decrease of transmissivity or generation of scattered light are assumed to be the damage precursor, and thereby damage threshold is measured to be 18mJ or 10^(15)W/m^2, and the dependence of transmissivity on incident energy is presented. From the experiment result, it is found that avalanche ionization and self-focusing effect dominate the damage process in transparent dielectric.
关 键 词:透明介质 YAG激光 透射率 激光损伤阈值 散射光
分 类 号:TN246[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.115