检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]清华大学水利水电工程系水沙科学教育部重点实验室,北京100084 [2]国电电力建设研究所,北京100055 [3]中南大学能源与动力工程学院,长沙410083
出 处:《环境科学学报》2004年第3期400-404,共5页Acta Scientiae Circumstantiae
摘 要:首先采用气、液两相模型对7组结构参数的反应器进行模拟计算,然后根据计算结果选择了一组较优的结构参数进行气、液、固3相的数值模拟计算.结果表明,通过数值模拟方法对内循环生物流化床反应器流体力学特性进行计算可获得优化的反应器结构参数;明确了循环挡板的长度及位置对反应器内液相流场分布的影响较为显著的事实;同时指出固相颗粒的加入对反应器内液相流速的分布几乎没有影响,固相含率较高的区域在反应器升流区.A gas-liquid two-phase model was applied to describe the hydrodynamic behaviors of reactors with seven types of structure parameters and one suit of the seven types of structure parameters was proved to be optimal by the calculation. A gas-liquid-solid three-phase model was then established to calculate the flow field of the optimal reactor. The results showed that the numerical simulation method can be used to describe the hydrodynamic behaviors of internal-circulation bio-fluidized bed reactor and to optimize the structure parameters. The length and the position of the baffle have significant influence on the hydrodynamic behaviors of liquid phase, the solid particle has little influence on the flow field of liquid phase and the high solid phase part appeared in the up-flow area.
关 键 词:内循环生物流化床 反应器 流体力学 循环挡板 计算方法 污水处理
分 类 号:X703[环境科学与工程—环境工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38