检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:关小军[1,2] 马璟[1,2] 周家娟[1,2] 刘清津[1,2] 张继祥[1,2] 董安平[1,2]
机构地区:[1]山东大学,250061 [2]济南英迈特科技发展有限公司,250100
出 处:《锻压技术》2004年第3期68-70,共3页Forging & Stamping Technology
摘 要:采用正交试验方法 ,对自主研制的植物粉 水基润滑剂中不同浓度的植物粉、增粘剂和乳化剂对最大拉深力的影响进行了初步研究。结果表明 :3种成分的不同浓度组合对最大拉深力影响明显不同 ,存在最优组合且植物粉影响最为显著 ;与无润滑条件相比 ,采用最优组合浓度的植物粉 水基润滑剂所对应的最大拉深力降低约 1 4 % 。The orthogonal experiment was conducted to investigate the effect of the different concentration combination of plant powder, tackifier and emusifier on the maximum drawing load in a plant powder -water base lubricant invented by us. The results show that the effects of the three ingredients on the maximum drawing load are obviously different, and the effect of the plant powder concentration is the most remarkable among them and there exists an optimized concentration combination. Compared to that under the condition without lubricants, the maximum drawing load under the optimized lubricated condition decreases by about 14%. And the surface qualification of the part is clearly improved.
关 键 词:植物粉-水基润滑剂 拉深力 增粘剂 乳化剂 正交实验 表面质量 拉深
分 类 号:TG386[金属学及工艺—金属压力加工]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.248