LZ锻造的砧宽比、料宽比的临界值研究  

Study on critical value of tool width ratio and blank width ratio of LZ forging

作　　者：梁晨[1] 刘助柏[1] 

机构地区：[1]燕山大学锻压研究所,066004

出　　处：《锻压技术》2004年第3期14-16,共3页Forging & Stamping Technology

摘　　要：通过有限元模拟LZ锻造 ,分析锻件心部一定区域内的应力场分布规律 ,得到对于不同压下率 ,在不同料宽比条件下 ,使轴向应力由拉应力转变为压应力的临界砧宽比 (w/h) cr;在不同砧宽比条件下 ,都存在着使横向应力由拉应力转变为压应力的临界料宽比 (b/h) cr。合理的工艺参数应由砧宽比、料宽比及压下率The stress distribution of the blank center is analyzed by finite\|element simulating LZ forging. The critical value of tool width ratio when the axial tense stress turns to compressive stress under given reduction ratio and blank width ratio is obtained; The critical value of blank width ratio when the transverse tense stress turns to compressive stress under given reduction ratio and tool width ratio is obtained too. The rational processing parameters of tool width ratio, blank width ratio and reduction ratio must match.

关 键 词：拔长 锻造 临界砧宽比 临界料宽比 有限元 数值模拟 

分 类 号：TG316[金属学及工艺—金属压力加工]