打捆机驱动轮系统接触三维有限元分析  

3D CONTACT FEM ANALYSIS ON THE DRIVING WHEEL SYSTEM OF BUNDLING MACHINE

作　　者：王凤辉[1] 万占鸿[1] 高兴岐[1] 李冰茹[1] 

机构地区：[1]鞍山科技大学,鞍山114044

出　　处：《力学与实践》2004年第4期56-58,共3页Mechanics in Engineering

摘　　要：应用ANSYS软件对打捆机驱动轮系统进行了三维接触非线性有限元分析,得出了接触应力的分布规律,并将其最大接触应力与应用简化方法进行了比较,两者相吻合的结果表明,有限元分析结果可为系统的进一步精确分析提供依据。The driving system is an essential part of the modern bundling machine. 3D contact nonlinear finite element analysis on the driving wheel system of the bundling machine is made by using the finite element analysis software ANSYS.. The contact stress distribution is obtained. It is found that the maximal contact stresses are in agreement with the simplified calculation using the conventional method.

关 键 词：打捆机 驱动轮系统 接触有限元 接触应力 金属加工机械 

分 类 号：TG305[金属学及工艺—金属压力加工]