检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李闽[1] 王道成[1] 姜逸伟[2] 毕建霞[2]
机构地区:[1]"油气藏地质与开发工程"国家重点实验室 [2]中原油田勘探开发科学研究院
出 处:《天然气工业》2004年第7期62-64,共3页Natural Gas Industry
基 金:系国家重点实验室开放式基金项目 (编号 :PLN0 117)
摘 要:根据实验研究结果 ,提出了一个预测凝析油气体系蜡沉积的热力学模型。该模型把蜡沉积视为多固相过程 ,沉积出的蜡由几个固相组成 ,每一个固相都由一个拟组分表示 ,固相之间彼此互不混合。根据这一认识 ,文章提出了气液多固相物料平衡方程 ,用考虑固相沉积的多相闪蒸数值算法 ,模型能对析蜡量进行量化模拟计算。模型中气液相参数通过状态方程计算获得。通过对凝析油蜡沉积的计算表明 ,用该模型计算的蜡的沉积量和析蜡温度与实验结果非常吻合。According to the experimental results, a thermodynamic model of predicting wax precipitation in condensate-gas system is proposed in the paper. This model takes the wax precipitation as a multiple solid phase precipitating process,the wax precipitated being composed of several solid phases teach solid phase is indicated as a pseudocomponent; and the solid phases don't mix with each other. In light of such a thought,a gas-liquid multiple solid phase material balance equation is put forward in the paper. The amount of wax precipitation can be simulatively calculated by the model by use of the multiple phase flash numerical algorithm in consideration of solid precipitation. The gas and liquid phase parameters in the modle may be obtained through calculating by applying state equation. The calculated results indicated that the model-calculated amount of wax precipitation and the model-calculated cloud-point temperatures were well identical with the experimental results.
关 键 词:凝析油 热力学模型 析蜡温度 稳定性 防蜡工艺 多固相模型
分 类 号:TE37[石油与天然气工程—油气田开发工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.142.166.23