提高水相法氯化聚乙烯弹性体热稳定性的实验  

Experiment on thermal stability increase of chlorinated polyethylene elastomer by aqueous phase process

作　　者：张立武 

机构地区：[1]湖北双环化工集团有限公司新产品开发所,湖北应城432407

出　　处：《中国氯碱》2004年第7期17-18,共2页China Chlor-Alkali

摘　　要：对水相法氯化聚乙烯(CPE)弹性体的氯化浆料进行了实验室研究,找出了导致CPE弹性体热稳定性较差、热分解温度偏低的原因,通过改造使CPE的热分解温度稳定在170℃以上。Chlorinated sizing material of aqueous phase process, chlorinated polyethylene (CPE) elastomer was researched in the lab. The reason lead to worse CPE elastomer heat stability and lower thermal decompose temperature were found out. The thermal decompose temperature was stabilized above 170 ℃after improvement.

关 键 词：水相法 氯化聚乙烯弹性体 热稳定性 CPE 氯化浆料 热分解温度 

分 类 号：TQ334[化学工程—橡胶工业]