型钢九辊矫直力能参数与压弯挠度关系解析  

Relation between Bending Deflection of H-beam and Energetic Parameters of Nine- roller Straightening

作　　者：李忠富[1] 臧勇[1] 王会刚[1] 

机构地区：[1]北京科技大学机械工程学院,北京100083

出　　处：《北京科技大学学报》2004年第5期542-544,共3页Journal of University of Science and Technology Beijing

基　　金：唐山市机电重点实验室基金资助项目(No.04360802B-4)

摘　　要：H型钢辊式矫直机在辊压腹板时使翼缘产生塑性变形以达到矫直目的.为了避免矫直过程中出现矫直缺陷,通过建立适当的矫直力学模型,求出了H型钢九辊矫直的压弯挠度与弯矩、矫直力的解析关系,确定了生产中调节矫直辊压弯挠度来保证各辊处的弯矩、矫直力等力能参数的范围.Aiming at H-beam straightening, the plastical deformation of H-beam flange should be occurred when the rollers pressed the web plate. In order to avoid flaws in the process of H-beam straightening, an adequate mechanical model was established and the relations between bending moments, forces and bending deflections of the H-beam in nine-roller straightening were deduced. The range of the technological parameters such as forces and bending moments under each straightening roller was determined by adjusting the bending deflections in practice.

关 键 词：H型钢 辊式矫直 力能参数 压弯挠度 

分 类 号：TG333.23[金属学及工艺—金属压力加工]