脱氢醋酸的合成研究  

Study on Synthesis of Dehydroacetic Acid

作　　者：韩品志 陈国松[2] 刘小祥 

机构地区：[1]江苏德邦化学工业集团有限公司,江苏连云港222023 [2]南京工业大学,江苏南京210009

出　　处：《精细与专用化学品》2004年第20期10-13,共4页Fine and Specialty Chemicals

摘　　要：脱氢醋酸的工业生产方法有双乙烯酮法和乙酰乙酸乙酯法。通过改变反应条件和催化剂 ,研究了合成脱氢醋酸的最佳反应条件。乙酰乙酸乙酯法合成脱氢醋酸选择碳酸氢钠做催化剂时 ,反应温度要控制在 2 0 0～2 10℃。双乙烯酮法的最佳反应条件是以三乙烯二胺做催化剂 ,用量为 0 3% ,反应温度 4 0℃ ,反应时间 75min ,最高收率为 78 2 % ,所得产品为白色粉末 ,杂质少 ,无醇不溶物。There are two methods for producing dehydroacetic ac id industrially i.e.diethenone process and ethyl acetoacetate process. The optimum reaction conditions for synthesis of dehydroacetic acid are investigated by cha nging reaction conditions and catalysts. In ethyl acetoacetate process the react ion temperature is controlled at the range of 200～210℃ with sodium bicarbonate as catalyst. For synthesis of dehydroacetic acid by diethenone process using t rivinyl diamine as catalyst the optimum reaction conditions are as follows: reac tion temperature 40℃,reaction time 75 min with catalyst dosage of 0.3%. The y ield of obtained white powdered dehydroacetic acid with less impurity and withou t alcohol non-soluble matter is 78.2%.

关 键 词：双乙烯酮 合成研究 催化剂 反应温度 高收率 乙酰乙酸乙酯法 反应时间 最佳反应条件 三乙烯二胺 杂质 

分 类 号：TQ414[化学工程]