钢包加硅吹氧升温热模拟试验  

HOT MODEL TEST ON TEMPERATURE RISE BY BLOWING OXYGEN ALONG WITH Si ADDITION IN LADLE

作　　者：潘贻芳[1] 李永来[1] 王砚铭 

机构地区：[1]天津钢厂钢铁研究所

出　　处：《炼钢》1993年第6期27-30,6,共5页Steelmaking

摘　　要：在500kg中频感应炉内进行的热模拟试验结果表明,加硅吹氧升温是有效的,升温处理后钢液中残存的[Sol.Al]基本能控制在0.007％以下,满足小方坯连铸对钢水成分的要求。Results of hot model test conducted at a 500kg medium frequency induction furnace show that the effective way to raise temperature is to blow oxygen and add silicon simultaneously into the ladle. By doing so the [Sol. Al] can be kept well below 0.007%,which comes up to the requirements of continuous casting billets with regard to the chemical compositions.

关 键 词：中频感应炉 吹氧升温 熔融金属罐 

分 类 号：TF777[冶金工程—钢铁冶金]