利用铝阳极氧化膜电镀制备纳米材料  

Nano-materials Fabricated by Electroplating in Anodic Aluminum Oxide Film

作　　者：干学宏[1] 郑国渠[1] 张九渊[1] 

机构地区：[1]浙江工业大学材料科学与工程研究所,浙江杭州310032

出　　处：《电镀与环保》2004年第6期9-12,共4页Electroplating & Pollution Control

基　　金：浙江省自然科学基金资助项目 ( 5 0 10 71)

摘　　要：铝阳极氧化膜由于具有孔径分布均匀、空洞之间互相不连通、取向一致等特点 ,在纳米结构材料中获得广泛研究 ,对铝阳极氧化膜及其合成的纳米线表征 ,是开展铝阳极氧化膜研究的关键。首先制备了铝阳极氧化模板 ,随后通过电镀法制备了纳米线 ,并对铝阳极氧化模板和纳米线进行了表征。最后 ,文章对铝阳极氧化膜的研究前景进行了展望。Since anodic oxide aluminum is uniform in pore diameter distribution, not through between pores and consistent in pore orientation, it has been widely studied for nano-materials. Characterization of anodic aluminum oxide and its synthesized nano-wire is a key in research on anodic aluminum oxide. A template of anodic aluminum oxide is prepared first, then a nano-wire is electrodeposited, and on this basis, the template of anodic aluminum oxide and nano-wire are characterized. Finally, the prospect of anodic aluminum oxide is discussed.

关 键 词：制备 电镀 铝阳极氧化膜 表征 合成 孔径分布 均匀 纳米线 纳米材料 纳米结构材料 

分 类 号：X781[环境科学与工程—环境工程] TB383[一般工业技术—材料科学与工程]