冷连轧机出口飞剪的控制方法  

Control of Flying Shears by Exit of Tandem Cold Mill

作　　者：葛延津[1] 张贵强[1] 陈岩[1] 

机构地区：[1]东北大学信息科学与工程学院,辽宁沈阳110004

出　　处：《东北大学学报（自然科学版）》2004年第12期1142-1144,共3页Journal of Northeastern University(Natural Science)

基　　金：国家科技部创新基金资助项目(01C2621210454)

摘　　要：讨论了经冷连轧机轧制出的带钢,当其剪切点在冷连轧机的末机架出现后,轧机出口飞剪对带钢进行剪切的控制算法·在飞剪进行剪切过程中,飞剪剪刃位置是由与飞剪电动机同轴安装的凸轮开关发出的指令进行控制的·采用所述控制方法进行剪切,带钢剪切断面光滑·同时给出了在剪切过程中带钢承受的张力与正常轧制过程中张力的关系·The control process and relevant algorithm for cutting strips by flying shears are discussed and developed under conditions that the cut point of strip is positioned near the exit of the last stand of tandem cold mill(TCM). The shear knives' position of the flying shears is controlled by the instructions sent from a cam switch which is coaxial with the motor rotor of the flying shears. The strip sections cut off by such a control procedure and relevant algorithm are proved, and the strips' tensile between this control procedure and conventional rolling process is also given.

关 键 词：飞剪 剪切控制 KSV算法 凸轮开关 张力 

分 类 号：TP39[自动化与计算机技术—计算机应用技术]