加压生物氧化法处理印染废水的动力学研究  

Research on the dynamics model of printing and dyeingwastewater treatment by pressurized bio-oxidation process

作　　者：黄江丽[1] 赵文生[1] 施汉昌[2] 钱易[2] 

机构地区：[1]吉林化工学院环境科学与工程系,吉林吉林132022 [2]清华大学环境科学与工程系环境模拟与污染控制国家联合重点实验室,北京100084

出　　处：《环境污染与防治》2004年第6期430-432,共3页Environmental Pollution & Control

基　　金：吉林省科委"有机废水高效处理设备的开发与应用"资助项目 ( No.吉科合字第 962 80 1-2 )

摘　　要：加压生化法与其他处理印染废水的方法相比 ,具有工艺简单、耐冲击能力强、投资低、操作参数仪表控制、剩余污泥量少等优点。探讨了在加压曝气条件下处理印染废水的生化反应机理 ,测定其动力学参数 ,建立加压生物氧化法处理印染废水的生物氧化反应动力学模型 ,为印染废水的加压生化处理提供了可靠的设计与运行参数。The method of pressurized activated sludge process contrasted with others has the following advantages:its techniques are simple and advanced ,and the ability to endure loading strike is strong;it occupies fewer land area and its investment is lower;the most important one is that it has less residual sludge. The research on bio-oxidation reactive mechanism of printing and dyeing wastewater treatment by pressurized activated sludge process was described. The value of dynamics parameters in the course of experiment was obtained and the dynamics model was determined. At the same time, the designing and running parameters in treating printing and dyeing wastewater with pressurized bio-oxidation process were provided.

关 键 词：印染废水 加压生物氧化法 剩余污泥量 生化处理 生化法 曝气 动力学研究 生化反应 控制 优点 

分 类 号：X791[环境科学与工程—环境工程] X703