典型汽车涂装废水处理工艺  

Treatment Technology of Representatie Coating Wastewater of Automobile Manufacturing

作　　者：蔡莹 高亮 

机构地区：[1]上海市机电设计研究院,上海200040

出　　处：《净水技术》2004年第6期41-44,共4页Water Purification Technology

摘　　要：　针对汽车涂装废水中含有树脂、表面活性剂、重金属离子、油、颜料等污染物,特别是其中的电泳废水、喷漆废水成份复杂,浓度高,可生化性差的,采用分质处理、混凝沉淀、混凝气浮、砂滤等工艺对涂装废水进行处理,取得了良好效果:CODcr去除率大于80%。实际运用表明,该工艺在技术和经济上均是合理可行的。In this paper,the treatment techology of coating wastewater of automobile manufacturing containing resin, surface actie agent, heay metals,oil,paint, dyestuff etc.,especially the electrophoresis and painting wastewater which are more complex,more concentrated and lower biodegradable to treat was introduced. By pretreatment of some wastewaters separately ,accordding to their quality and by coagulation and sedimentation or flotation,filtration to treat the combined wastewater a good results was obtained, with 80% remoual efficiency of COD cr and indicated that this technology would be practical and feasible both in technique and in economy.

关 键 词：废水处理工艺 分质处理 CODCR去除率 混凝气浮 电泳废水 涂装废水 可生化性 汽车涂装 颜料 树脂 

分 类 号：TQ639[化学工程—精细化工] X703[环境科学与工程—环境工程]