宽展挤压模具正交试验研究  

Research on spread extrusion die using the orthogonal experimental method

作　　者：黄克坚[1] 包忠诩[1] 陈泽中[1] 朱永光 

机构地区：[1]南昌大学机电工程学院,330029 [2]江西方大铝型材有限公司,330029

出　　处：《锻压技术》2004年第6期49-52,共4页Forging & Stamping Technology

基　　金：南昌大学"2 1 1"工程资助项目 (1 0 2 - 2 )

摘　　要：宽展模具的结构参数 (入口宽度、出口长度、宽展模的高度、工作带的基准长度、模孔的位置 )对SDV值 (流速均方差值 ,该值越小 ,挤压过程越稳定 )存在影响 ,在模具设计中 ,更重要的是确定这些参数对流速均方差的影响。针对上述问题 ,本文在数值模拟的基础上 ,采用正交试验法 ,对铝型材产品FD -Awdd - 7生产中所用的宽展模具进行了研究 ,在这些模具结构参数中 ,对挤压流速均方差有显著的影响的参数包括 :宽展模的入口长度。The main structure parameters(including the inflow width of spread cavity ,the outflow width of spread cavity, the height of spread cavity ,the length of the fiducially working land and the flowing position settings of the aperture for the shaping of a product, which influence the distribution of the velocity of metal flow along the working land outflow side) of spread extrusion die has some influences on the value of SDV (SDV-standard deviation of the velocity in axial direction during the extrusion forming, the lower of the value, the steadier of the extrusion progress ). Furthermore, we need to know the salience degree of each parameter. As an example, using the orthogonal experiment method and based on the numerical simulation , this paper classifies these parameters of the spread extrusion die used in the production of a kind of aluminum profile whose trademark is FD-awdd-7 , and makes a conclusion that the parameters which have a significant contribution to the value of SDV include the inflow width of spread cavity , the flowing position settings of the aperture for the shaping of a product, the mutual affection between the inflow width of spread cavity and the outflow width of spread cavity.

关 键 词：宽展 流速均方差 挤压模具 工作带 铝型材 模具结构 模具设计 入口 正交试验 研究 

分 类 号：TG375[金属学及工艺—金属压力加工]