孔型立辊调宽轧制的三维刚塑性有限元研究  

STUDY ON CALIBER WIDTH REDUCTION ROLLING BY 3D RIGID PLASTIC FINITE ELEMENT METHOD

作　　者：李学通[1] 杜凤山[1] 吴建峰[2] 

机构地区：[1]燕山大学,秦皇岛066004 [2]宝钢股份技术中心

出　　处：《上海金属》2005年第1期31-34,共4页Shanghai Metals

基　　金：国家自然科学基金项目 (50075076)

摘　　要：采用刚塑性有限元法 (FEM)建立宝钢 2 0 50粗轧区孔型立辊调宽过程轧制模型。计算所得多块带钢轧制力值与现场实测结果吻合良好 ,模拟的带钢头尾形状与现场实际结果吻合也很好 ,并建立立轧稳态狗骨形状计算的数学模型。同时研究得出立辊孔型角度对狗骨高及轧制力的影响规律。Based on the rigid plastic finite element method (FEM), a rolling model for caliber width reduction of 2050mm roughing trains in Baosteel was established. The calculated rolling force values of strips were in agreement with the measured data, and the simulated shapes at the head and tail of strip after subsequent horizontal rolling were also in accord with the actual picture on the spot. The mathematical model was also used for establishing the steady dog bone shape of edging. Meanwhile, the influence of the caliber angle on the dog bone height and the rolling force was also obtained by the investigation.

关 键 词：热轧带钢 孔型立辊 调宽轧制 刚塑性有限元法 

分 类 号：TG333.71[金属学及工艺—金属压力加工]